playvolutionHQ Logo

Creating & Curating Collections Of Early Learning Resources

Playvolution HQ


Join Mailing List

Categories |

DIY | Sensory Play Ramps

Revised | Originally Published: July 3, 2021 @ 3:57 pm

Overview

Here are do-it-yourself instructions for building sensory play ramps. The original plan was to construct a small stand-alone ramp that’d fit nicely into a sensory play bin, but it could also be used outside the container with small cars, balls, thread spools, and other ramp-friendly toys.

Here’s a few seconds of video so you can see the ramp in action:

Supplies For Building Sensory Play Ramps

You’ll need the following:

  • Cardboard
  • Ruler Or Yardstick
  • Utility Knife
  • Pen
  • Hot Glue Gun

Process

Start with a 12-inch square piece of corrugated cardboard.

Cut that piece into a 12-inch by 4-inch piece and a 12-inch by 8-inch piece.

Score lines one inch in on the long sides of the 12-inch by 4-inch piece. The score should slice about halfway through the cardboard. This piece will become the ramp.

Now, flip the cardboard over and fold the long edges of the piece along the score lines to create the ramp sides.

Next, set aside the ramp and lay out the base. Start by measuring 4 7/8 inches from each end along the cardboard’s long side and draw lines parallel to the cardboard’s short sides. After that, measure 3 1/2 inches from each end along the cardboard’s long side and draw a diagonal line to the opposite side. Check the photo below to see how your layout should look.

Time to cut out the base. First, cut along the diagonal lines and discard the triangles. Then, score along the remaining lines.

To form the base, flip the cardboard over and fold it along the score lines.

Put it all together by applying a line of hot glue along one edge of the base, as shown in the illustration below, and then attaching one outside edge of the ramp.

After letting the glue set up for a few moments, apply glue to the other base edge and attach it to the ramp side, as seen below.

Let the glue dry, stand up the ramp, and get to ramping.

Sensory Play Ramps Wrap Up

Once you’ve made a couple of sensory play ramps, you can play around with design variations. For example, to change the ramp’s slope, adjust the angle of the ramp base by measuring in a bit less–2 1/2 or 3 inches instead of 3.5.

Making sensory play ramps with kids provides a chance for them to hone a variety of skills. After making a few on your own to get comfortable with the process, create more with kids’ help. DIY projects like this are rich in opportunities for STEM and other learning. Check out this post for more reasons to DIY with kids.

As always, your thoughts, comments, questions, and photos of your sensory play ramps are welcome in the comments.

Contribute content to Playvolution HQ
Brought to you by Explorations Early Learning

Browse Trainings

Stay Updated

Receive regular play, professional development, and caregiver self-care updates.

Author

Jeff Johnson is an early learning trainer, podcaster, and author and the founder of Explorations Early Learning and Playvolution HQ.

Thanks To Our Patrons

This post was made possible by patrons like these, who generously fund our work:

Supporters

Lissadell Greene      Stephanie Goloway

Lagina Kozak      Michelle Hankins

Fans

Jen Flemming      Lizz Nolasco

Susan Warner      Kelly Sigalove

Vittoria Jimerson      Codee Gilbert

Monica Morrell      Pam Soloman      Melissa Franklin

Teresa Watson      Erika Felt

Melissa Taylor      Jahmeela Robinson

Amber Maurina      Terra Calamari

Lagina Kozak      Samantha Yeager-Cheevers

Elizebeth McCoy      Sammy Cousens      Ellen Cogan

Explore Membership Options


Play Haven

Join Play Haven


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Don`t copy text!